Vszerda 18AWG ATX 24P EPS 8P PCI-E 8P Extension Cable Kit Green
Green sleeved extension kit adds 300 mm to ATX 24-pin, EPS 8-pin and two PCI-E 8-pin cables with 18 AWG cores and cable combs
- 18 AWG cores deliver stable power to motherboard and GPU
- 300 mm length with 5557 to 5559 connectors fits most full-tower builds
- Pre-bent 180° layering keeps cables flat and tidy after routing
- Heat-shrink-free sleeves give a clean uniform look in green
- Two combs per cable lock wires in place for consistent spacing
Cable Kit Contents
The Vszerda 18AWG extension kit includes a 24-pin ATX cable, a 4+4-pin EPS cable and two 8-pin PCI-E cables, each 300 mm long with black connectors. The high-density flexible sleeve gives a stiff yet adaptable feel while the pre-bent design keeps layers neat after a 180-degree bend. Cable combs are supplied for every cable to maintain uniform spacing.
Installation Experience
Each cable uses a male 5557 to female 5559 interface so it plugs directly between the power supply and the motherboard or graphics card without tools. The heat-shrink-less construction reduces bulk, but the tight sleeve can make routing through narrow grommets difficult. Forcing the pre-bent cables into sharp bends may stress the pins, so plan the path before seating connectors fully.
Compatibility Check
Verify that your power supply uses standard ATX 24-pin, EPS 4+4-pin and PCI-E 8-pin outputs, as the kit follows that default pinout. The 18 AWG core and 3 mm diameter suit typical modular PSU cables, yet proprietary or non-standard pin arrangements will not work. Confirm the 300 mm length reaches your components without tension, and note that actual green shade may vary slightly from product images.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $23.99
- Pricier than about 66% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I confirm the ATX 24-pin extension is seated correctly after routing?
The pre-bent design keeps cables neat after a 180° bend; push each 5559 female connector onto the PSU's 5557 male pins until it clicks and verify the 300 mm length reaches without tension.
What cables and combs are included versus what I must supply?
Kit supplies one 24-pin ATX, one 4+4-pin EPS, two 8-pin PCIe extensions — each with two combs — all 300 mm long; you provide the power supply and motherboard or GPU.
Which connector mix matches a build needing CPU and dual GPU power?
The fixed set gives one EPS 4+4-pin for the CPU and two PCIe 8-pin for graphics, so it covers that configuration in a single kit.
More in Internal PSU & Riser Cables
Similar items
Lian Li LAN2-1X PCIe 3.0 Riser Cable 200mm Vertical GPU Bracket
- Black
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





