Vszerda 2×4-pin Molex to 6-pin PCIe adapter 15 cm 18 AWG 2-pack
Converts two Molex connectors into one 6-pin PCIe plug using 18 AWG oxygen-free copper in a 15 cm length, supplied as a pair
- Powers a 6-pin graphics card from two Molex connectors
- 15 cm length keeps internal cable runs tidy
- 18 AWG oxygen-free copper conductors reduce resistance
- PVC jacket with braided shielding protects wires
- Two adapters included for multi-GPU setups
Two Molex to one 6-pin PCIe adapter
This pair of adapters converts two 4-pin Molex LP4 connectors into a single 6-pin PCIe power plug for a graphics card. Each cable is 15 cm long and built with 18 AWG oxygen-free copper inside a flexible PVC jacket with braided shielding. The short length keeps internal routing tidy in compact cases.
Suits builders with spare Molex leads but no free
It works with most graphics cards that use a 6-pin PCIe power input, including models from ASUS, Gigabyte and Sapphire. The adapters are not for systems that already provide enough native PCIe power leads, nor for cards requiring an 8-pin or 12VHPWR connector. Buyers whose power supply lacks sufficient wattage or Molex headers for the graphics card’s total draw should look at a higher-capacity PSU instead.
15 cm cable length with 18 AWG conductors
The 15 cm reach and 18 AWG gauge determine whether the adapter fits your case layout and carries the current your card demands. Confirm the power supply can deliver the graphics card’s maximum power consumption before connecting.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I pick between the two cables in the 2-pack?
Both cables are identical 15 cm adapters with 18 AWG conductors, so use either one for a single graphics card and keep the spare for a second build or future upgrade.
What does the 6-pin PCIe connector actually deliver to my graphics card?
The adapter converts two Molex LP4 plugs into one 6-pin PCIe plug, letting a power supply without native PCIe connectors feed a card that requires that socket.
Which Molex and PCIe standards does this cable follow, and what limits apply?
It uses standard 4-pin Molex LP4 plugs on the supply side and a 6-pin PCIe plug on the card side, with 18 AWG oxygen-free copper and PVC jacket for reliable current handling.
More in Internal PSU & Riser Cables
Similar items
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister IDC50P 50 Pin Male Connector to Terminal Block Adapter
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





