Vszerda 2-Pack 10 Port PWM Fan Splitter Hub SATA Powered
A two-pack of SATA-powered hubs each splitting one PWM header into ten fan channels with RPM feedback on the CPU fan port
- Expands one motherboard header to ten fans
- SATA power drives up to 10 channels simultaneously
- PWM control on all 4-pin fans connected
- 3-pin fans run at full fixed speed
- Two hubs included for separate cooling zones
10-channel PWM fan hub for SATA-powered builds
This splitter hub expands a single motherboard PWM header into ten channels so you can run multiple 12 V fans from one connection. It draws power through a SATA connector and ships as a two-pack for larger or dual-system setups. The PWM header passes speed control to every 4-pin fan attached. Three-pin fans connected to the hub run at full speed continuously.
Compatibility checks before ordering
Verify that your motherboard has a free 4-pin PWM header for the hub's control cable and a spare SATA power connector from the PSU. Confirm your fans are 12 V models with either 3-pin or 4-pin plugs; the hub does not support voltage-controlled headers or 5 V ARGB devices. Only the channel marked "CPU Fan" returns an RPM signal to the board, so plan which fan you want monitored. EVA adhesive pads are included for securing the hub inside the chassis.
Upgrading from limited motherboard headers
Most boards provide only a handful of fan headers, forcing compromises on airflow or requiring daisy-chain cables that lack PWM control. This hub replaces that bottleneck by delivering ten independently powered channels from one PWM signal and a single SATA feed. The jump is worth it when you need coordinated speed curves across many fans — such as radiator stacks or multi-fan cases — without sacrificing motherboard ports or adding extra controllers.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How many fans can one hub support and what power connector does it use?
Each hub expands a single motherboard PWM header to ten fans and draws power through a SATA connector.
How do the 3-pin and 4-pin fan channels behave differently on this hub?
Four-pin fans receive PWM speed control while three-pin fans run at full speed because they lack a PWM signal wire.
Why does only the CPU Fan header return an RPM signal to the motherboard?
The motherboard can read only one RPM signal per connector, so the hub routes that signal through the dedicated CPU Fan channel.
More in Internal PSU & Riser Cables
Similar items
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister IDC50P 50 Pin Male Connector to Terminal Block Adapter
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





