Vszerda 24 Pin ATX 2.01 EPS Extension Cable 8 Inch 18AWG
An 8-inch 18AWG extension cable adds reach between a 24-pin ATX 2.01 power supply and motherboard
- Extends ATX 2.01 power reach by 8 inches
- Male-to-female 24-pin connectors fit standard motherboard headers
- 18AWG tinned copper conductors carry 3.3, 5 and 12 V DC reliably
- Adds strain relief for PSU cables in large or complex chassis
- 8-inch length provides routing space inside the case
Extension Cable for ATX 2.01 Power
This Vszerda cable extends a 24-pin ATX connection by eight inches using 18AWG tinned copper conductors. It carries a male and a female EPS 24-pin connector to bridge the gap between a power supply and motherboard. The cord handles 3.3, 5 and 12 V DC lines for standard desktop power delivery. It is built for internal use in custom or large-chassis builds.
Check Connector Orientation and Clearance
Verify that your power supply and motherboard both use standard 24-pin ATX headers before ordering. Ensure the eight-inch reach matches the routing path inside your case without stretching or sharp bends. Confirm there is enough space around the motherboard socket for the female connector to seat fully. The 18AWG wire gauge suits typical desktop current loads on each rail.
Replaces Short Factory Leads in Big Cases
This extension replaces the need to reposition a power supply when its native cables fall short of the motherboard socket. It upgrades from makeshift splicing or daisy-chained adapters by providing a single, purpose-made link. The jump is worth it when cable management demands a clean, direct run across a wide chassis or behind a custom loop. Builders who need multiple extensions or right-angle plugs should look elsewhere.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 24-pin ATX 2.01 extension ship with any extra adapters or do I need to buy them separately?
The cable is a single 24-pin male-to-female extension; no extra adapters are included or required for standard ATX 2.01 connections.
Should I pick the 8-inch or 6-inch length for a large chassis build?
The supplier title lists 8 inches while the specification table states 6 inches; choose the length that matches the clearance you measured inside your case.
Will 18AWG tinned copper conductors handle 12 V, 5 V and 3.3 V rails without voltage drop?
18AWG tinned copper is rated for the 3.3 V, 5 V and 12 V DC rails carried by a 24-pin ATX connector, providing reliable power delivery across the short extension.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





