Vszerda 24-Pin ATX Power Supply Jumper Bridge Tool internal power cable
A 24-pin ATX jumper bridge powers a PSU without a motherboard for bench testing or mining rigs
- Test PSU without motherboard via 24-pin bridge
- Power water-cooling loop independently of mainboard
- 20+4 pin connector starts miner PSU directly
- Compact 2.36×0.98×0.47 in tool fits tight spaces
- Durable black 9 g build for repeated bench use
24-Pin ATX Jumper Bridge Tool
This 24-pin ATX jumper bridge lets you power a PSU independently of a motherboard. It is designed for technicians and builders who need to test a power supply or run a water-cooling loop without a full system connected. The tool plugs directly into the main 24-pin connector to close the power-on circuit.
Sustained Operation Without Motherboard
Once inserted the jumper keeps the PSU running continuously so pumps, fans or lighting can be validated under real load. No motherboard signals are required, which means the power supply stays active for as long as the test demands. This avoids the brief spin-up that occurs when the power button is only momentarily shorted.
Compact Black Housing With 20+4 Pin Layout
The moulded black housing measures roughly 2.36 by 0.98 by 0.47 inches and weighs about 9 grams, so it fits alongside tight cable routing. A 20+4 pin arrangement matches standard ATX headers and the bridge is keyed to prevent reversed insertion. No extra cables or adapters are included in the package.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the Vszerda 24-pin ATX jumper draw noticeable power or generate heat when left running all day?
The jumper only bridges the PS_ON and ground pins to start the power supply; it contains no active circuitry, so it draws negligible current and produces no measurable heat.
What must I already own for the Vszerda 20+4-pin bridge tool to function?
You need an ATX power supply with a standard 24-pin connector; the tool plugs into that connector and requires no motherboard or additional cables.
Will the Vszerda 24-pin starter module work with an older PSU that still uses a 20-pin main connector?
Yes, the connector is a 20+4 design that separates, so the 20-pin portion fits legacy ATX supplies while the extra 4 pins can be left disconnected.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





