Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 0.75 m SlimSAS SFF-8654 cable with 74-pin male connectors supports 24 Gbps SAS data rates at 85 Ohm impedance for internal server and storage links
This Vszerda SlimSAS cable connects two SFF-8654 8i ports in a straight male-to-male arrangement. It is built to the T10 Serial Attached SCSI standard and extended for PCIe 4.0 operation at 24 Gbps. The 74-pin high-density connectors use 32 AWG ribbon construction with 85 Ohm impedance for signal integrity. Length is 0.75 metres.
Installers fitting slimline backplanes, RAID controllers or JBOD expanders in 1U or 2U enclosures will value the low-profile ribbon format. Builds that require right-angle plugs, external bulkhead connectors or longer runs should select a different cable. The 74-pin gender and pin-out are fixed, so adapters cannot change the endpoint geometry.
The fixed length of 0.75 metres determines whether the cable spans the intended device spacing. Measure the internal routing path before ordering; no slack or extension is included. If the chassis layout demands a longer or shorter assembly, this specific part will not fit.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 10Gtek |
| Product type | SAS |
| Performance | |
| Rated speed | 24 Gbit/s |
| Ports & slots | |
| Connector count | 74 |
| Connector details | Sff-8654 to Sff-8654 8i |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | Data Transfer |
The ribbon cable uses a straight 74-pin plug; allow enough depth for the connector body and the 32AWG ribbon to sit flat against the board.
Both ends are keyed male SFF-8654 8i; align the notch on each plug with the receptacle key before pressing straight in — forcing it sideways bends pins.
Replace the cable if link errors rise, if the ribbon shows kinks or pin corrosion, or after any chassis rework that stressed the straight plugs.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?