Vszerda 3 Pin Chassis Fan Hub 1 to 8 IDE 4Pin internal power cable
A 3-pin fan hub splits one motherboard header into eight channels and draws 12V power from an IDE 4-pin connector
- Connect up to 8 fans from one motherboard header
- Powered directly by IDE 4-pin for stable 12 V supply
- Manual three-speed switch for high, low or off
- Double-sided adhesive tape secures hub inside the case
- No PWM or RPM monitoring — simple voltage control only
What this hub does
The Vszerda fan hub splits one IDE 4-pin power connector into eight 3-pin fan headers so a desktop motherboard can drive more cooling fans than its own headers allow. It is built for 12 V operation and includes a manual switch for HIGH, LOW or OFF fan settings.
Check your fans and power
Each attached fan must be a 3-pin 12 V model; the hub has no PWM circuitry and cannot report fan speeds to the motherboard. The single IDE 4-pin plug draws all current from the power supply, so verify that the PSU can deliver enough current for the total number of fans you plan to connect.
Upgrade path and limits
This hub replaces the practice of daisy-chaining splitters or leaving case fans unplugged when header count runs out. The jump is worthwhile when you need more than the board provides and accept fixed-speed or manually switched operation; it is not suited for builds that require automatic PWM control or RPM monitoring.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 90% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the Vszerda fan hub ship with mounting hardware or must I buy it separately?
The hub includes built-in double-sided adhesive tape on the back for securing it inside the chassis; no extra brackets or screws are required.
How do I choose between the HIGH, LOW and OFF gear settings on this splitter?
Use HIGH for full 12V speed, LOW for reduced voltage and quieter operation, and OFF to stop the fans completely; note that some fans may not start on LOW and LED brightness drops at lower voltage.
What does the 12V rating mean once the hub is installed in my PC?
The hub draws 12V from the IDE 4Pin connector and distributes it to up to eight 3-pin fans, letting you run all channels from a single motherboard header without PWM or speed reporting.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 1.2m internal power cable with dual USB and audio
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





