Vszerda 4-Pin IDE to 5 SATA Power Cable Splitter 18AWG Black Sleeved 40cm
Connects one 4-pin IDE supply to five SATA drives using 18 AWG sleeved wiring over 40 cm
- Converts one IDE connector into five SATA power ports
- 18AWG conductors handle high-current drives reliably
- Black sleeving protects wires and simplifies cable routing
- 40cm length fits standard chassis layouts
Vszerda 4-Pin IDE to 5 SATA Power Splitter
This adapter converts a single 4-pin IDE connector into five SATA power outputs for internal drives. It suits builders adding multiple hard disks or SSDs to a system with limited Molex headers. The 18AWG conductors handle typical drive currents and the black sleeving keeps the loom tidy inside a server or workstation chassis. Length is 40cm from the IDE plug to the first SATA connector.
Installation notes and common issues
Plug the IDE end into a free Molex lead from the power supply and press each SATA head onto a drive until it clicks. The 40cm reach fits most mid-tower layouts but can fall short in full-tower cases where drives sit far from the PSU. Total current is shared across all five outputs so loading every port with high-spin-up drives may trip the rail; stagger spin-up in BIOS if the board allows it. The splitter adds no voltage regulation — it simply passes the rail through.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the splitter is delivering power to all five SATA drives after installation?
Verify each connected drive spins up and appears in the system BIOS or operating system disk utility.
What connectors are included on the cable and do I need any extra adapters?
The cable has one 4-pin IDE male plug and five SATA power connectors; no additional adapters are required for standard drives.
More in Internal PSU & Riser Cables
Similar items
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister IDC50P 50 Pin Male Connector to Terminal Block Adapter
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





