Vszerda 4-pin Molex to 2×5 V & 2×12 V 3-pin fan power cable 12.5 cm
Splits one 4-pin Molex connector into two 5 V and two 12 V 3-pin fan headers, 12.5 cm long
- Converts one Molex connector into four 3-pin fan headers for expanded cooling options
- Delivers two 5 V and two 12 V outputs to match fan speed requirements
- Colour-coded white and black plugs simplify correct voltage selection
- 5 cm length fits tidy internal routing in compact cases
- Lightweight 10 g design adds minimal strain to motherboard headers
Power-adapter cable for case fans
This 12.5 cm cable converts a single 4-pin Molex connector into two 5 V and two 12 V three-pin outputs. It is built for PC builders who need to run multiple 3-pin fans from one Molex header.
Replaces limited 3-pin headers
When a motherboard or fan controller lacks enough 3-pin sockets, this adapter adds four connections without occupying extra board headers. The jump is worthwhile whenever the existing 3-pin ports are exhausted but a Molex plug is free.
Steady voltage delivery under load
Each output maintains its rated 5 V or 12 V line continuously, so fan speeds stay consistent during prolonged operation. The short 12.5 cm run keeps resistance low, preventing voltage drop that could otherwise slow fans over time.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 92% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance do I need for the 12.5 cm cable and its four 3-pin connectors?
The cable is 12.5 cm long and splits into two white 12 V and two black 5 V 3-pin plugs, so allow enough room for the split and each connector to seat without tension.
Which Molex pin do I use to get 5 V versus 12 V for my fans?
Plug the single 4-pin Molex male into a standard peripheral power lead; the cable internally routes 5 V to the two black 3-pin plugs and 12 V to the two white 3-pin plugs.
Will the 3-pin plugs wear out and need replacing?
The 3-pin connectors are rated for normal internal use; if a plug becomes loose or a wire frays, replace the whole 10 g adapter cable.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 5.5×1.7 mm female to 5.5×2.5 mm male DC power adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB Type C Female to Female Adapter internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





