Vszerda 5-Pack 5V 3-Pin RGB Extension Cable 1FT with Gender Changer
Five 1-foot 5 V female-to-female RGB extension cables with a male-to-male gender changer for motherboard 3-pin headers
- Extends 5 V 3-pin RGB lighting up to 1 ft
- Includes male-to-male gender changer for flexible header connections
- Five cables let you route multiple strips from one header
- Designed only for 5 V AURA systems — not 12 V RGB
- Motherboard header supplies up to 15 W; keep total runs under 3.3 ft
Purpose and compatibility
This Vszerda pack supplies five 1-foot female-to-female extension cables for a motherboard 5 V 3-pin AURA RGB header. Each cable includes a 3-pin male-to-male gender changer so you can join two female-ended strips or fans. The wiring carries only the 5 V addressable RGB signal and does not add any extra power capacity.
Who it suits and who it does not
Builders extending 5 V addressable RGB strips or fans up to 3.3 ft total length will find these cables convenient. They are not suitable for 12 V RGB systems, for runs longer than the suggested limit, or for installations where the motherboard header cannot supply enough current for all connected devices.
Behaviour under sustained load
The motherboard header typically provides at least 5 V at 3 A for a maximum of 15 W to all attached RGB devices. If too many strips are daisy-chained the LEDs will dim, signalling that the header is overloaded; reducing the number of connected devices restores normal brightness.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What motherboard header is required for these 5V 3-pin RGB extension cables?
A 5V 3-pin AURA RGB header is required; the cables do not work with 12V RGB systems.
Can I daisy-chain these 1-foot extensions beyond the suggested 3.3 ft limit?
The notes suggest keeping total RGB cabling under 3.3 ft; longer runs may cause dimming if the motherboard header is overloaded.
How do I confirm the arrow mark on each plug is aligned correctly after installation?
Ensure the arrow on every connector points to the 5V pin on both the motherboard header and the RGB device.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





