Vszerda 5pcs 100cm 6pin to 8Pin (6+2Pin) PCI-E Cable 18AWG Mining internal power cable
Set of five 100 cm PCIe cables that adapt a 6-pin PSU connector to an 8-pin (6+2) graphics-card plug using 18 AWG wire
- Five cables let you power multiple GPUs from one PSU
- 18 AWG conductors handle high mining currents safely
- 100 cm length gives flexible routing in large cases
- 6-pin to 8-pin (6+2) adapters fit varied graphics cards
- Yellow and black sleeves add clear cable identification
Five-piece PCI-E power adapter kit
This set contains five 6-pin to 8-pin (6+2-pin) cables intended to connect graphics cards to a power supply. Each cable measures approximately 100 cm or 40 inches in length. The yellow and black sleeving uses 18 AWG conductors wrapped in plastic and metal connectors. The kit is designed for mining rigs and other multi-GPU configurations requiring supplemental power.
Thermals and power delivery
The 18 AWG wire gauge supports the current draw typical of PCI-E auxiliary connectors without excessive voltage drop. Connectors are moulded from plastic with metal pins to maintain a secure fit under continuous load. No active cooling or fan is present, so the cables rely on case airflow to remain at safe temperatures during sustained mining or compute workloads.
Six-pin to eight-pin breakout compatibility
These adapters convert a single 6-pin PSU output into an 8-pin (6+2) graphics-card input, reducing the load on the motherboard slot. They suit builders who need to power cards that require an 8-pin connector but only have 6-pin leads available. Buyers whose power supplies already provide native 8-pin cables do not need this adapter.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $37.99
- Pricier than about 77% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 6-pin to 8-pin PCIe cable and what step is often missed?
Connect the 6-pin end to the power supply and the 8-pin (6+2) end to the graphics card, ensuring the 2-pin segment is fully seated if the card requires an 8-pin connector; the common mistake is leaving the extra 2 pins unplugged on an 8-pin socket.
What maintenance or replacement will the 18AWG cable need over time?
Inspect the yellow and black connectors and 100cm cable run periodically for discolouration, melted plastic or loose pins; replace any cable showing heat damage or intermittent contact to avoid power delivery issues.
What limit appears first when the cable runs continuously at mining loads?
The 18AWG conductor cross-section sets the current ceiling; sustained high draw will hit the wire’s ampacity limit before the 6-pin or 8-pin connectors reach their rated capacity, so monitor connector temperatures.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





