Vszerda 5PCS 4Pin PWM Fan Splitter Cable 1 to 3 27cm
Five 27 cm cables split one motherboard PWM header into three fan connectors using 24 AWG tinned-copper wire
- Connect three PWM fans to one motherboard header
- 27 cm length suits most case routing needs
- Black snakeskin sleeve keeps internal wiring tidy
- Tinned copper 24 AWG conductors carry PWM signals reliably
- Two connectors omit sense wire to prevent signal collision
5-Pack 4-Pin PWM Fan Splitter Cables
This set contains five cables that each split one motherboard 4-pin PWM header into three fan connections. Builders running multi-fan radiators or case arrays can drive two or three PWM fans from a single socket. The 27 cm length suits typical mid-tower routing. Buyers who need more than three fans per header or who require individual speed reporting for every fan should look elsewhere.
Check header type and speed-signal needs
Verify that the motherboard header is a standard 4-pin PWM type; 3-pin fans will run but only two of the three branches carry the tachometer wire back to the board. Ensure the combined current draw of the attached fans stays within the header rating. The 1007 24 AWG tinned-copper conductors and black snakeskin sleeve are designed for internal chassis use only.
Snakeskin sleeve aids cable management
The braided sleeve bundles the three leads together, reducing clutter and improving airflow paths inside the case. Because two branches omit the speed-measurement wire, the motherboard receives a single RPM signal rather than three separate readings. No software or additional adapters are included in the pack.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the pack contain and is anything extra needed?
The pack contains five 27 cm splitter cables; each splits one motherboard 4-pin PWM header into three 4-pin fan connectors so you can run up to fifteen fans from five headers with no extra parts required.
Why are there five identical cables instead of different versions?
Every cable is the same 27 cm, 24 AWG tinned-copper design with black snakeskin sleeving; buying the five-pack simply gives you multiple identical splitters for several headers or builds.
How does the speed-signal wiring work when three fans share one header?
Only one fan per splitter reports its RPM signal back to the motherboard; the other two connectors omit the sense wire to prevent signal collisions while all three fans still receive the same PWM control signal.
More in Internal PSU & Riser Cables
Similar items
Micro Connectors F04-240W-KIT White internal power cable kit
- White
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister F14 2.4GHz Wireless USB Optical Mouse 2400DPI 7 Buttons
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





