Vszerda 90 Degree ATX 24Pin Adapter internal power cable
A 90-degree ATX 24-pin adapter that reorients the power connector for tight chassis clearance
- Changes cable direction 90 degrees for tight chassis
- Plug-and-play 24-pin connector fits any ATX motherboard
- High-grade materials maintain signal integrity and durability
- Works with E-ATX, ATX and Micro-ATX boards
- Install stepwise, wait 10 seconds to prevent shorts
90-Degree ATX 24-Pin Adapter
The Vszerda adapter redirects a standard 24-pin ATX power cable by 90 degrees. It solves clearance problems in chassis with limited height by changing the cable orientation from vertical to horizontal. The board uses a male-to-female layout that plugs directly into the motherboard socket. It weighs approximately 30 g and ships as a single unit.
Builders with tight PSU clearance
This adapter suits anyone fitting an ATX power supply into a compact case where the 24-pin connector would otherwise press against a side panel or radiator. It works with E-ATX, ATX and Micro-ATX motherboards that use the standard 24-pin interface. Builders who have ample vertical space above the motherboard socket do not need this part.
Simple installation with a safety step
Installation is plug-and-play and requires no software or tools. The supplier notes that the adapter must be fitted step by step to avoid shorting pins; the power cable should be removed and the system left for 10 seconds before the board is seated. Once aligned, the connector locks into the motherboard like a standard 24-pin plug.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What motherboard power connector must my board provide for this 24-pin 90-degree adapter to fit?
Your motherboard needs a standard 24-pin ATX power socket; the adapter plugs directly into that port and redirects the cable 90 degrees.
Will this right-angle adapter work with an existing ATX power supply that already has a straight 24-pin cable?
Yes, the male end of the adapter accepts any standard 24-pin PSU cable while the female end connects to the motherboard, rotating the cable horizontally.
After installing the adapter, how can I verify the connection is secure before powering on?
Ensure the adapter is fully seated on both the motherboard header and the PSU cable, wait ten seconds after removing power, then confirm no pins are bent or shorted.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





