Vszerda 90W 12V DC-ATX 20-pin internal power cable
A fanless 90 W DC-ATX module converts 12 V input to standard ATX rails for mini-ITX and 1U systems
- Fanless design for silent operation
- 90 W output with 90 % efficiency
- 12 V DC input powers ATX systems
- Industrial solid capacitors handle 0 °C to 55 °C
- Compact 35 × 47 × 12 mm fits mini-ITX and 1U cases
90W DC-ATX Power Module
The Vszerda 90W 12V DC-ATX module converts a single 12V DC input into standard ATX voltages for low-power systems. It targets builders of Mini-ITX, HTPC, POS terminals, industrial control boxes and other compact computers where an internal AC-DC supply will not fit.
12V Input with 5% Tolerance
The unit accepts 12V DC with a plus or minus 5% range and delivers up to 90W total output at 90% efficiency or greater. Regulated rails include +3.3V, +5V, +5VSB, +12V and -12V, each held within specified minimum and maximum voltages and ripple limits. Operation is rated from 0°C to 55°C ambient temperature.
Fanless Solid-Capacitor Build
Industrial-grade solid capacitors and a fanless design give silent, dust-immune operation suited to harsh environments. The board measures approximately 35 by 47 by 12 mm without wires and uses a 20-pin ATX connector for direct motherboard mounting. An external 12V power adapter must be supplied separately to feed the DC input.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 67% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick a different wattage or form-factor version of this 90 W DC-ATX module?
The supplier lists only this single 90 W, 20-pin model measuring 35 × 47 × 12 mm; no other capacities or sizes are offered.
What does the 90 W rating actually deliver inside a Mini-ITX or 1U build?
At 90 % efficiency the board supplies up to 4 A on +3.3 V, 4 A on +5 V, 4 A on +12 V and 0.05 A on -12 V, with 5 VSB at 2 A for standby.
The 20-pin ATX connector — does it limit power compared to a 24-pin standard?
The 20-pin plug carries the same +3.3 V, +5 V, +12 V and -12 V rails specified at 90 W total; the four extra pins on a 24-pin connector are simply additional ground and +3.3 V/+5 V/+12 V contacts not required for this output level.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





