Vszerda ARGB 3x 8-Pin GPU Power Cable Kit 10.43 Inches
Three PCIe 8-pin extension cables with 5 V ARGB sync and 10.43 inch length
- Three PCIe 8-pin extensions reach distant GPU power sockets 10.43 Inches
- 5V 3-pin ARGB sync matches motherboard lighting effects automatically
- Separate 0.6 mm optic-fibre and power layers prevent signal interference
- Kit includes three male-to-female cords for multi-GPU or daisy-chain builds
- Minimum 90 degree bend radius requires adequate case clearance for safe routing
Vszerda ARGB 8-Pin GPU Power Cable Kit
This kit includes three PCIe 8-pin male-to-female extension cables designed to connect a power supply to a graphics card. Each cable measures 10.43 inches in length and features integrated addressable RGB lighting. The cables use a 0.6 mm optic fibre layer separated from the power supply layer for signal clarity. A 5V 3-pin ARGB header on a compatible motherboard is required for lighting control.
Builders adding ARGB lighting to GPU power runs
The set suits builders who want synchronised lighting on their GPU power cables and have a motherboard with a 5V 3-pin ARGB header. It is not for systems lacking a 5V ARGB header or for installations where cables cannot be routed without bending tighter than 90 degrees. Cases with very tight clearances around the GPU power connectors should be avoided.
10.43-inch cable length and 90-degree bend limit
The fixed 10.43-inch length determines reach between the PSU and the graphics card. The optic fibre and power layers must not be bent to a radius tighter than 90 degrees, so the case must provide enough space for gentle curves. Verify routing space before purchase.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 73% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the ARGB lighting syncs with my motherboard after installing the Vszerda cable kit?
Connect the 5V 3-pin ARGB headers to a compatible motherboard header, then use the board's RGB control software to confirm the three cables respond to colour and effect changes.
What connectors and cables are included in the box, and do I need a specific motherboard header?
The kit contains three PCIe 8-pin male-to-female extension cords, each 10.43 inches long with a 0.6 mm optic fibre layer; a motherboard with a 5V 3-pin ARGB header is required for lighting control.
Which version should I choose if my case has limited clearance behind the graphics card?
These cables are 10.43 inches long and must not be bent tighter than a 90 degree radius, so measure the space between your GPU power socket and the side panel before selecting this kit.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister Smart Outdoor WiFi Solar Alarm Siren IPX5 Waterproof internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister 7 Band Digital Equalizer 3.5 mm Jack internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





