Vszerda ATX 3.0 PCIe 5.0 12VHPWR 16-Pin 90° Down Adapter
A 90-degree down-angled 12VHPWR adapter adds clearance for wide graphics cards in tight cases while delivering up to 600W over PCIe 5.0
- Fits wide cards in narrow cases with 90° down angle
- Connects in tight spaces thanks to angled 16-pin design
- Delivers up to 600 W via PCI-SIG 12VHPWR H+ spec
- Ready for RTX 40 and RDNA 3 GPUs with 12VHPWR connector
- Meets ATX 3.0 and PCIe 5.0 power standard requirements
90° Down 12VHPWR Adapter
This Vszerda adapter converts a PCIe 5.0 12VHPWR 16-pin connection to a 90-degree downward angle. It is designed for builders fitting wide graphics cards into narrower chassis where side-panel clearance is tight. The right-angle profile reduces strain on the connector and cable routing inside the case.
Builders with limited side-panel depth
The adapter suits systems where a straight 12VHPWR plug would press against the glass or metal panel. It also helps when surrounding components leave little room for a direct connection. Buyers whose cases already offer generous clearance or who use right-angle cables from the PSU side will not need this extra piece.
PCI-SIG 12VHPWR H+ 600W rating
The connector follows the PCI-SIG 12VHPWR H+ specification with twelve power pins and four signal pins. It is rated for up to 600 W delivery to compatible graphics cards such as RTX 3080, 3090 Ti and newer PCIe 5.0 models. This power ceiling is the single figure that decides whether the adapter matches your card's requirement.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 62% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 90-degree down angle on the 16-pin 12VHPWR adapter actually provide?
The 90-degree down angle increases clearance between the GPU and the side panel, allowing wider cards to fit in narrower chassis where a straight connector would hit the glass.
The title lists 3080 and 3090TI — does this adapter fit RTX 40-series cards?
The adapter uses the PCI-SIG 12VHPWR H+ connector with 12 power pins and 4 signal pins specified for PCIe 5.0 and ATX 3.0, the standard used by RTX 40-series and RDNA 3 graphics cards.
What does the 600 W rating mean once the adapter is installed in a system?
The 600 W rating is the maximum power the 12VHPWR H+ connector can deliver through its 12 power and 4 signal pins, matching the PCIe 5.0 specification for high-end graphics cards.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister NGFF M.2 to USB 2.0 Type-C Adapter Card with SIM Card Slot
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister HDMI USB Socket Motherboard for Switch internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





