Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects an Oculink 4i host port to a U.2 NVMe SSD with integrated SATA power over 50cm
This cable adapts an internal Oculink 4i (SFF-8611) host port to a U.2 (SFF-8639) target interface for NVMe SSDs. It is built for PCIe 4.0 bandwidth and will not work with SATA SSDs. Builders adding enterprise or high-capacity U.2/U.3 drives to a compatible motherboard or backplane use this link. It is not for systems that only offer SATA or M.2 slots without an Oculink header.
Signal wires are 32AWG tinned copper with 15µm gold-plated contacts for corrosion resistance and stable conductivity. A 15-pin SATA power lead is integrated so the drive receives power without a separate adapter. The 50cm length fits typical server, NAS and high-end desktop chassis while keeping routing tidy. The fixed connectors mean the assembly cannot be shortened or re-pinned in the field.
Replaces a missing or too-short factory cable when a board provides an SFF-8611 port but the chassis needs a U.2 bay connection. The jump is worthwhile when the platform already exposes an Oculink 4i lane and you want full PCIe 4.0 throughput to a U.2 NVMe drive. If the host only has SATA or standard M.2 slots this cable cannot bridge the gap.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cable supports PCIe 4.0 transfer speeds for NVMe U.2 SSDs.
It needs a 38-pin Oculink 4i (SFF-8611) host port, a U.2 (SFF-8639) drive bay, and a 15-pin SATA power plug from the PSU.
Connect the SFF-8611 end to the motherboard, the SFF-8639 end to the U.2 SSD, and plug the 15-pin SATA power lead into the PSU; the power lead is often forgotten.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?