Vszerda Dual 4Pin to PCIe 8P 6+2Pin Power Adapter 15cm
Connects a PCIe 8-pin graphics card to two Molex 4-pin power supply leads, 15 cm long
- Powers PCIe graphics cards from legacy supplies
- Dual Molex 4-pin inputs feed a single 8-pin output
- 15 cm length keeps cable routing tidy
- Supports both 5 V and 12 V rails
- Enables modern GPU use on older PSUs
Power adapter for older PSUs
This Vszerda cable converts two Molex 4-pin connectors into a single PCIe 8-pin 6+2 plug. It lets a power supply without native PCIe outputs run a modern graphics card. The adapter is intended for builders upgrading a GPU while keeping an existing PSU. It supports DC 5 V and 12 V delivery.
Thermals and power draw
The cable carries 12 V power from the PSU to the graphics card without active components. Heat and noise depend entirely on the power supply and GPU load, not on the adapter itself. Power draw is determined by the connected card and the PSU rating. The 15 cm length keeps voltage drop minimal in normal use.
What the bundle changes
Only the adapter cable is included in the package. No extra connectors, sleeves or software are supplied. The dual Molex ends must plug into separate PSU rails for balanced current. Builders needing more PCIe plugs or different lengths must source additional cables separately.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the two 4-pin Molex plugs to the power supply correctly?
Plug each 4-pin Molex connector into separate power supply cables, not the same daisy-chain line, then attach the 6+2-pin PCIe end to the graphics card.
Will the Molex connectors or cable insulation degrade over time?
The connectors are standard Molex 4-pin and PCIe 6+2-pin types; no maintenance is required unless physical damage or loose pins appear.
What power limit does the 15 cm adapter hit first under continuous load?
The dual Molex design supports DC 12 V delivery up to the PCIe 8-pin specification, so the power supply’s own 12 V rail capacity is the limiting factor.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





