Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects three HDMI 2.1 sources to one display with 48 Gbps bandwidth for 8K at 60 Hz, 4K at 120 Hz and 1080p at 240 Hz
This Vszerda HDMI 2.1 switch connects three HDMI sources to a single display. It supports video resolutions up to 8K at 60 Hz, 4K at 120 Hz and 1080p at 240 Hz. A maximum bandwidth of 48 Gbps handles high-frame-rate gaming and high-dynamic-range content. One-touch switching and front-facing indicator lights keep the desktop tidy and show the active input.
The unit replaces HDMI 2.0 or earlier switches that cap at 4K 60 Hz or lower bandwidth. The jump is worth it when sources such as a PS5, Xbox Series X or a modern GPU output 4K at 120 Hz or 8K at 60 Hz. It also adds support for HDCP 2.3 and Dynamic HDR, which older hubs cannot pass through. Bandwidth headroom of 48 Gbps prevents signal degradation on long cable runs.
The switch is strictly a 3-in, 1-out device; it cannot send one source to three displays. All three inputs and the output share the same HDMI 2.1 link, so only one source is active at a time. Achieving 8K 60 Hz or 4K 120 Hz requires certified Ultra High Speed HDMI cables on both the source and display sides. The 48 Gbps ceiling is the hard limit of the HDMI 2.1 specification itself.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Use a certified HDMI 2.1 cable rated for 48 Gbps; the switch itself is HDMI 2.1 and will pass the full bandwidth when the cable meets the same spec.
Connect the included USB power cable to a 5 V source, then press the front button to cycle through the three inputs; the LED shows the active port and the switch remembers the last selection after a power cycle.
The ports are standard HDMI sockets rated for thousands of insertions; keep them dust-free and insert cables straight to avoid bent pins, no scheduled maintenance is required.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?