Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 90° right-angled HDMI 2.1 adapter with magnetic coupling that releases under strain, supporting 8K at 60Hz and 4K at 120Hz over 48Gbps bandwidth
This Vszerda adapter converts a standard HDMI port into a 90-degree right-angled connection with a magnetic breakaway coupling. It is designed for users who route cables in tight spaces behind displays, laptops or wall-mounted TVs where a straight plug would protrude too far. The magnetic interface holds firmly during normal use but releases if the cable is pulled sharply, protecting the host device from damage. It suits home-theatre installers and mobile professionals who frequently dock and undock.
The adapter complies with the HDMI 2.1 specification and provides 48 Gbps bandwidth. This ceiling permits 8K video at 60 Hz and 4K video at 120 Hz, as well as 1440p and 1080p signals. HDCP and 3D formats are supported within the same bandwidth envelope. Any source or display combination demanding more than 48 Gbps — such as uncompressed 8K at higher refresh rates or multi-stream configurations — will exceed the practical limit of this single-link adapter.
Simply align the male connector with the HDMI port and let the magnetic face snap into place; no screws or latches are required. The aluminium shell conducts heat away from the contacts, and an LED indicator confirms an active link. The most frequent problem occurs when the magnetic hold is mistaken for a mechanical lock — a firm tug on the cable will separate the joint, which is intentional but can surprise first-time users. Ensure the right-angle orientation matches the port layout before seating the adapter.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The adapter supports both 8K at 60Hz and 4K at 120Hz simultaneously; there is no separate version to choose.
It provides the full HDMI 2.1 bandwidth needed for uncompressed 8K 60Hz or 4K 120Hz video, plus HDCP and 3D support.
The 2.1 standard caps output at 8K 60Hz or 4K 120Hz, and the adapter meets that spec for all listed resolutions down to 1080p.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?