Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one motherboard USB 3.0 19-pin header into a USB 3.1 Type-E A-Key port and a second 19-pin header, adding up to four ports at 5 Gbps with a 1.3 ft cable and auxiliary power
This Vszerda adapter converts a single motherboard USB 3.0 19-pin header into two male ports. One port is a USB 3.1 Type-E A-Key for front-panel USB Type-C connectors, the other remains a USB 3.0 19-pin header. A short 1.3ft cable and a small 4-pin power connector are included for stable operation. Self-adhesive pads simplify mounting inside the case.
The splitter supports data transfer up to 5Gbps under the USB 3.2 Gen1 specification. It enables up to four additional USB 3.0 ports, comprising two standard USB 3.0 and two USB Type-C connections. Backward compatibility covers USB 2.0, 1.1 and 1.0 peripherals. The single upstream 19-pin header remains the bandwidth bottleneck for all attached devices.
The adapter is a passive cable assembly with no active cooling, so it generates no audible noise. Power for downstream devices is supplied through the dedicated 4-pin connector, reducing load on the motherboard header. Under typical peripheral loads the assembly runs at ambient temperature. No fan, pump or thermal interface material is involved.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Lighting Connector to USB A |
The splitter converts a single motherboard USB 3.0 19-pin male header into two male ports: one USB 3.1 Type-E A-Key and one USB 3.0 19-pin, adding up to four internal ports including two Type-C.
Connect a USB 3.0 device, then check your OS device list or system profiler to verify the link shows SuperSpeed 5Gbps instead of a lower rate.
The box contains the 1.3ft splitter cable with both output headers, an extra 4-pin power header, and self-stick pads for mounting; no separate purchase is required.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?