Vszerda M.2 Key A-E to PCIe 4x Riser Cable 270° 4-pin FDD power
Connects a PCIe x4 card to an M.2 Key A or E slot with a 270° riser and optional 4-pin FDD power
- Connect PCI-E cards to M.2 Key A-E slots via 270° riser
- Power devices with 4-pin FDD connector for 12V supply
- Supports M.2 2230 form factor for compact installation
- Works with PCI-E 1X, 4X, 8X, 16X cards at 1X speed
- Compatible with Windows XP through 11 and Linux without drivers
M.2 Key A-E to PCIe 4x adapter
This adapter connects a standard PCIe device to an M.2 Key A or E slot on a motherboard. It accepts M.2 type 2230 modules and provides a 270-degree angled PCIe 4x connector. A 4-pin FDD power connector supplies 12V power when the installed device requires it.
Replaces direct M.2 card installation
The cable allows a full-size PCIe card to be used where only an M.2 Key A-E slot exists. The upgrade is worthwhile when a system lacks a standard PCIe slot but has a compatible M.2 interface supporting PCIe signalling rather than CNVio2. Speed is limited to PCIe 1x throughput because the M.2 link width restricts bandwidth.
Sustained operation with external power
High-quality wire and connectors maintain PCIe 3.0 stability during extended transfers. The optional 4-pin FDD power feed prevents voltage drop on the 12V rail when the attached card draws continuous current. No drivers are required across Windows XP through 11 and Linux.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $33.99
- Pricier than about 74% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 270° M.2 Key A-E plug clear low-profile brackets?
The 270° connector bends back toward the board, so it fits inside tight chassis where a straight riser would hit the bracket or side panel.
What step do installers forget when seating the 2230 M.2 module?
They often omit the single mounting screw that locks the M.2 card to the standoff; without it the edge connector can lift and drop link speed.
When should the 4-pin FDD power lead be connected?
Attach the FDD plug only if the PCIe card requires 12 V auxiliary power; leave it disconnected for cards that draw all power from the slot.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





