Vszerda M.2 NVME PCIe 4.0 Adapter with Heat Sink internal power cable
Adds an M.2 NVMe SSD to a PCIe x16 slot with a heatsink and thermal pad for Gen4 speeds
- Use NVMe SSD without motherboard M.2 slot via PCIe x16 adapter
- PCIe 4.0, 3.0, 2.0 support for 2230, 2242, 2260, 2280 drives
- Included heat sink and thermal pad maintain peak NVMe performance
- Driver-free install on Windows XP, 7, 8, 10 for Key M NVMe only
- Boot from NVMe if motherboard has CSM function enabled
M.2 NVME PCIe 4.0 Adapter
This adapter lets you install an M.2 NVME SSD into a PCIe x16 slot when your motherboard lacks a native M.2 connector. It supports PCIe 4.0, 3.0 and 2.0 drives in 2230, 2242, 2260 and 2280 lengths. An aluminium heat sink and thermal pad are included to maintain drive performance.
Builders without an M.2 slot
The card is designed for systems that have a free PCIe x16 slot but no M.2 NVME interface on the motherboard. It will not accept M.2 SATA SSDs with a B key, and it cannot be used in PCIe x1, x4 or x8 slots. Buyers who need SATA support or a different slot size should look at something else.
PCIe x16 slot requirement
The adapter only works in a full-size PCIe x16 slot, so the motherboard must provide one that is electrically and physically compatible. If your board lacks a spare x16 slot, this card cannot be installed.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 55% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the Vszerda M.2 NVME PCIe 4.0 Adapter and what step is commonly missed?
Insert the Key M NVME SSD (2230, 2242, 2260, or 2280) into the M.2 slot, secure it with the screw, attach the thermal pad and heat sink, then plug the adapter into a PCIe x16 slot. The step often missed is confirming the motherboard has CSM enabled in BIOS if you plan to boot from the NVME drive.
What maintenance or replacement will the Vszerda adapter need over time?
The adapter itself has no moving parts and requires no scheduled maintenance. The included thermal pad may dry out after several years; replacing it with a standard M.2 thermal pad restores optimal heat transfer to the heat sink.
What limit appears first when the Vszerda adapter runs under sustained heavy load?
The heat sink and thermal pad manage the NVME SSD's temperature. Under sustained heavy writes, the SSD will hit its thermal throttle limit first, reducing speed to protect itself; the adapter's PCIe 4.0 x16 interface does not bottleneck the drive.
More in Internal PSU & Riser Cables
Similar items
STARTECH LP4PCIEX8ADP 6.1 in LP4 to 8 Pin PCIe Power Cable Adapter
- 6.1 in (15.5 cm)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister IDC50P 50 Pin Male Connector to Terminal Block Adapter
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





