Vszerda Mini SAS SFF-8087 to 4 SATA 7pin Cable 50cm
Connects four SATA drives to a Mini SAS SFF-8087 controller at 6 Gbps over 50 cm
- Product colorCopper
- Connect four SATA drives to one Mini SAS SFF-8087 port
- Supports 6 Gbps data transfer under the SAS 2.1 standard
- 50 cm length fits typical server chassis layouts
- Copper conductors ensure reliable signal integrity
- Simple internal cabling for RAID and storage arrays
Server Storage Cable
This Vszerda internal cable links a Mini SAS SFF-8087 host port to four SATA 7-pin drives, supporting 6 Gbps data rates under the SAS 2.1 standard. The 50 cm copper assembly is built for server and RAID environments where multiple drives connect to a single controller.
RAID Builders and Server Upgraders
Suits administrators adding up to four SATA hard disks or SSDs to a Mini SAS SFF-8087 backplane or HBA. Not suited for systems that lack a Mini SAS SFF-8087 host connector or for drives that require a different host interface.
6 Gbps SAS 2.1 Rating
The cable meets the 6 Gbps SAS specification defined in the SAS 2.1 standard, so each of the four SATA lanes can run at full SATA III speed when the controller and drives support it.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Product color | Copper |
Questions about this item
What clearance does the Mini SAS SFF-8087 plug need behind a backplane?
The straight SFF-8087 connector adds about 39 mm beyond the latch, so allow at least that depth behind the port.
Which way does the SFF-8087 latch face when seating it on the controller?
The latch sits on the top side; press straight in until it clicks — forcing it upside-down bends the internal pins.
When should the cable be replaced if the four SATA 7-pin ends see daily drive swaps?
Inspect the SATA latches every 6 months; replace the assembly once any latch fails to hold or the copper shows green corrosion.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





