Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects external SFF-8088 storage to internal SFF-8087 ports with a 3.3 ft, 6 Gbps Mini SAS cable
This Vszerda cable bridges an external SFF-8088 26-pin Mini SAS port to an internal SFF-8087 36-pin Mini SAS port. It suits administrators connecting external JBOD enclosures or tape libraries directly to an internal RAID controller or HBA. The 3.3-foot length fits typical rack-to-server runs without excess slack.
The cable carries SAS 2.0 signalling at 6 Gbps and works with SAS or SATA storage systems and drive bays. One end presents a 26-pin male SFF-8088 connector with an upgraded press button for easier insertion; the other end provides a 36-pin male SFF-8087 connector with a locking latch for secure internal mounting. No active electronics or additional power are required.
As a passive copper assembly the cable generates no heat and produces no audible noise. It draws no power beyond the signalling lines supplied by the host controller. The 30 AWG conductors are shielded for reliable data transfer across the 1-metre span.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Heretom |
| Product type | Mini SAS |
| Product color | SFF-8087 to SFF-8088 |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 26 |
| Connector details | Sff-8088 to Sff-8087 |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | Data Transfer |
The cable is 1 m (3.3 ft) long and built to the SAS 2.0 specification for 6 Gbps operation.
It is a passive copper cable with no active electronics, so it generates no heat and draws no power beyond the signal itself.
You need an external SFF-8088 26-pin port on one side and an internal SFF-8087 36-pin port on the other.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?