Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects four SATA drives to an SAS controller with a 0.5 m forward breakout cable supporting 6 Gbps per channel
This new Vszerda MiniSAS SFF-8087 fan-out cable connects a single SAS controller port to four SATA drives inside a server or storage enclosure. The 0.5-metre length suits tight chassis routing where a short reach keeps airflow clear. It is built for administrators who need reliable 6 Gbps links between a host adapter and direct-attached SATA storage.
The SFF-8087 plug inserts straight into the controller while each SATA connector angles right, so cable dress follows the drive bay edge without sharp bends. AWG30 twinaxial pairs are stiff; forcing a tight radius can kink the dielectric and raise skew. Verify the controller bracket clears the right-angle bodies before latching, and seat each SATA plug fully to avoid intermittent detection.
Confirm the controller presents a standard SFF-8087 receptacle and that the enclosure drives use SATA data ports, not SAS-only backplanes. The cable is a forward breakout — host on the SAS end, drives on the SATA end — so it will not work in a reverse topology. Ensure the 100 Ohm impedance matches the controller specification and that 0.5 metres reaches from the card slot to the furthest drive bay.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 10Gtek |
| Product type | SAS to SATA |
| Product color | 1PC |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 36 |
| Connector details | Sff-8087 to 4x Sata |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | Data Transfer |
The system BIOS or RAID controller utility should detect all four connected SATA drives at up to 6 Gbps per channel without errors.
The package includes the 0.5 m AWG30 twinaxial breakout cable with a straight SFF-8087 plug and four right-angle SATA connectors; you must provide the SAS controller and SATA drives.
Select the forward breakout SFF-8087 to 4x SATA model with straight-to-right-angle ends for direct host-to-drive connections.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?