Vszerda Molex to 2×3/4-pin fan sleeved splitter cable 10 inch black
Connects two 3-pin or 4-pin PWM fans to a single 12 V Molex supply using a 10 inch black-sleeved 22 AWG cable
- Connects two fans from one Molex PSU output
- Black sleeved jacket protects 100 % copper 22 AWG wires
- 10 inch length fits compact and full-size cases
- 12 V Molex LP4 male to four female fan headers
- Only two pins energised so fans run at full constant speed
Vszerda Molex fan splitter cable
This 10 inch adapter converts a single Molex LP4 power connector into four fan headers, letting one PSU lead run up to four 3-pin or 4-pin case fans. It is aimed at builders who need extra fan connections without using motherboard headers.
Power delivery and control limits
The cable draws 12 V directly from the PSU through standard UL 1007 22 AWG copper wire, so fan speed is fixed at full voltage. Only two pins per header are energised, meaning PWM control and automatic throttling are not available regardless of the fan model.
Sleeved build and connector layout
A black sleeved jacket covers the 100 % copper conductors for durability and a clean look inside the case. The four female connectors are spaced along the Y-splitter, letting you route each fan to its mount while the single Molex male plug seats firmly in the PSU cable.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 10-inch length or look for a longer cable?
The cable is 10 inches long; choose it if that reach fits your case layout, otherwise a longer cable would be needed.
What does the 12 V Molex rating mean once the cable is installed?
It draws 12 V power directly from the PSU Molex connector, so both fans run at full 12 V speed with no motherboard speed control.
How does the Molex LP4 to 3-pin/4-pin interface limit fan control in practice?
Only two pins are energised on each fan header, so PWM or voltage-based speed control is not possible; fans spin at constant 12 V.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





