Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects an OCuLink SFF-8611 controller to an SFF-8654 backplane with 16Gbps active signalling over 50cm
This Vszerda active cable links an OCuLink SFF-8611 8i interface to an SFF-8654 8i interface at up to 16 Gbps. It uses tinned copper conductors and shock-resistant shielding to maintain signal quality across the 50 cm run. Both ends are male with an active latch for secure mating. The assembly is built for internal device-to-controller links in storage systems.
It suits builders connecting a backplane to a RAID or HBA controller when one side presents SFF-8611 and the other SFF-8654. The cable works in either direction, so the same part covers both port layouts. It is not for external connections, nor for setups that lack a free OCuLink 8x 80-pin slot. Buyers needing a different pin count or a passive design should look elsewhere.
The single figure that decides fit is the 16 Gbps data rate combined with the SFF-8611 to SFF-8654 connector pairing. If your controller and backplane match those two interfaces and can use an active 50 cm link, this cable meets the requirement. If either side uses a different connector or a lower signalling speed, the cable will not work.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Xiwai |
| Product type | Tinned copper wire |
| Product color | Black |
| Performance | |
| Rated speed | 16 Gbit/s |
| Ports & slots | |
| Connector count | 80 |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | Shock-resistant |
Yes, the cable requires a free OCuLink 8x 80-pin interface on either the controller or the backplane to function.
The cable connects an SFF-8611 male to an SFF-8654 male, so it will physically mate with a backplane that has an SFF-8654 socket.
Check the controller BIOS or operating system link-status utilities; they will report the negotiated speed for the active 8x connection.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?