Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects an OCuLink SFF-8611 8x controller to two U.2 SFF-8639 drives at 16 Gbps over a 50 cm active cable
This active cable links a host controller with an SFF-8611 8x port to two U.2 devices using SFF-8639 connectors. It suits builders adding high-speed storage to a backplane or direct-attached enclosure. The 50cm length fits typical server or workstation chassis routing.
The 8-lane design aggregates four lanes per U.2 target, so each drive can use its full PCIe 4x path. The step up is worthwhile when moving from a single 4x cable or a passive assembly that cannot sustain 16Gbps per lane. Systems without a free SFF-8611 80pin header cannot use this cable.
Active circuitry maintains signal integrity across the full length during continuous read and write workloads. The locking latch prevents accidental unseating when vibration or cable movement occurs. Thermal behaviour stays consistent because the design draws power from the host side without external supply.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NFHK |
| Model name | NF-SF-053-0.5M |
| Product type | OCULINK |
| Product color | Black |
| Performance | |
| Rated speed | 16 Gbit/s |
| Ports & slots | |
| Connector count | 80 |
| Connector details | Pcie |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | Data Transfer |
The active cable uses an 80-pin male OCuLink SFF-8611 plug with an active latch; allow room for the latch lever to swing open when seating or removing it.
Both U.2 plugs are male; insert each straight into the backplane until the active latch clicks, a step often skipped when routing the 50 cm cable in tight chassis.
Replace it if the active latch no longer holds, the 16 Gbps link drops to a lower speed, or the 50 cm cable shows kinks or connector damage.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?