Vszerda PC 8-Channel Fan Hub Knob Controller SATA 12V 35W
Eight-channel fan hub with manual knob control adjusts up to eight PWM or three-pin fans via SATA power, supporting 12 V and 35 W total draw
- Manual knob adjusts speed of up to eight fans
- Reduce noise and power draw at low load
- Boost airflow to cool components under heavy use
- Durable plastic and metal build with low heat loss
- Mounts in a PCI slot to save internal space
8-Channel Fan Hub with Manual Knob
This Vszerda controller manages up to eight PWM or three-pin fans from a single SATA power connection. A front-mounted rotary knob gives direct manual speed adjustment without software. It is built for PC builders who want simple, hardware-level control over case or radiator airflow.
PCI-Slot Mounting and Mixed Fan Support
The unit installs into a standard rear PCI bracket opening, keeping the hub inside the chassis and the knob accessible at the back. Each of the eight headers accepts four-pin PWM fans while remaining compatible with three-pin voltage-controlled models. A SATA plug draws up to 12 volts and 35 watts total for the connected fans.
Included Controller Only
The package contains the hub and knob assembly; no additional cables, adapters or mounting screws are supplied. Builders must provide their own SATA power lead from the PSU and any fan extension cables needed to reach the headers. No software or driver installation is required for operation.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 58% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the SATA power connection limit the controller to?
The SATA power input supplies up to 12 V and 35 W total across all eight fan channels.
What chassis space is required to mount the controller?
It installs in a standard PCI bracket slot at the rear of the case.
How is the speed set and what common mistake should be avoided?
Turn the single manual knob to adjust all fans together; do not expect automatic PWM curves because the board has no temperature sensor.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 10pcs IDE 4Pin to SATA 15p Y Splitter 10cm internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





