Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a PCI-E 5.0 MCIO SFF-8654 8I 74P port to two Oculink SAS SFF-8611 4I connectors over a .5 m shielded cable with locking plugs
This 0.5m adapter cable connects an MCIO SFF-8654 8I 74P port to two Oculink SAS SFF-8611 4I ports. It is built for high-performance server applications that require PCI-E 5.0 data rates. The male-to-male design uses OFC copper wiring and aluminum Mylar shielding. Locking connectors prevent accidental disconnection in dense chassis.
The SAS interface carries both data and control signals over copper, so cable length and shielding quality directly affect signal integrity at PCI-E 5.0 speeds. Exceeding the rated reach or bending the cable too tightly increases bit errors. This 0.5m assembly is specified for short intra-chassis runs where the connector pitch matches the backplane layout. Longer runs need active or optical alternatives not covered here.
The single MCIO 8I 74P connector breaks out to two Oculink SFF-8611 4I ends, halving the lane count per branch. This topology only works when the host controller and backplane both expect an 8I-to-2×4I split. Systems wired for straight 8I-to-8I or 4I-to-4I mapping will not link up with this cable.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ST-JY |
| Model name | MCIOSFF8654-2XOC11 |
| Product type | MCIO |
| Product color | Black |
| Ports & slots | |
| Connector details | Mcio |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | High Speed |
The 0.5m cable suits tight chassis routing; the 1m version gives more reach for larger enclosures or backplane-to-controller runs.
It supports the 5.0 signalling rate end-to-end, so each Oculink SFF-8611 4I lane can carry the full bandwidth the host controller and drives negotiate.
The 74-pin MCIO 8I connector carries eight lanes; total throughput is capped by the PCI-E 5.0 x8 link rather than the cable itself.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?