Vszerda PCI-E 64Pin to 12x 6Pin Breakout Board 80cm internal power cable
Converts a 64-pin server PSU into twelve 6-pin GPU connectors with an 80 cm cable, real-time voltmeter and on-board power button
- 64-pin ATX breakout feeds up to 12 or 17 PCIe 6-pin connectors
- Real-time voltmeter LED shows main rail voltage while mining
- On-board white button powers PSU on/off independently
- 80 cm cable reaches full-tower GPU arrays cleanly
- Compatible with 700 W to 1600 W HP and common server PSUs
Mining Power Distribution
This breakout board converts a single 64-pin server PSU connector into twelve 6-pin PCIe outputs for GPU mining rigs. It supports HP server power supplies such as the DPS-1200FB and PS-2751 series up to 1600 watts. A built-in voltmeter LED displays real-time input voltage while a push-button switch controls power-on sequencing.
Connector Count and PSU Compatibility
The board provides twelve 6-pin PCIe connectors and is validated for HP server units including the DPS-700LB, DPS-750RB and PS-2112-5L models. A secondary 4-pin floppy connector allows dual-PSU simultaneous start-up on the green 12-port variant. Correct pin orientation is mandatory to avoid equipment damage.
Sustained Load Monitoring
Under continuous mining loads the onboard LED voltmeter reports the main rail voltage in real time so operators can detect sag before instability occurs. The push-button switch enables manual power cycling without unplugging the PSU. When the floppy lead is connected to the primary supply the switch defers to the PSU’s own on/off behaviour.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 58% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How many PCI-E devices can the 64-pin breakout board power at once?
The board provides twelve 6-pin connectors, with an alternative layout offering up to seventeen connectors for high-density mining rigs.
What interface does the 80 cm cable use to connect to the server PSU?
It plugs into the ATX 6-pin TAT bus interface found on compatible HP and other server power supplies.
What clearance is needed to mount the breakout board inside a chassis?
The 80 cm cable allows flexible placement, while the board itself fits standard server PSU brackets and requires no proprietary mounting holes.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 10pcs IDE 4Pin to SATA 15p Y Splitter 10cm internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





