Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a U.2 NVMe SSD to a motherboard via PCIe 3.0 or 4.0 using an SFF-8643 adapter and 50cm cable
This adapter connects a U.2 NVMe SSD to a motherboard via a PCIe slot using the included 50 cm cable. The kit contains one card and one cable for direct NVMe storage attachment. It is intended for builders adding enterprise or high-capacity U.2 drives to a desktop platform. It does not support SAS or SATA devices.
The adapter maintains a 4x PCIe 3.0 or 4.0 connection to the drive under continuous workloads. Bandwidth scales with the host slot generation and the SSD capabilities. No active components on the card alter signal quality during extended transfers. Thermal throttling depends on the drive and system airflow, not the adapter itself.
The card draws no auxiliary power and adds negligible heat to the chassis. The cable routes power and data from the slot to the U.2 drive without active cooling. Noise is limited to the system fans already present. Power delivery follows the PCIe slot specification for the attached NVMe device.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Xiwai |
| Product type | Pci express 4.0 |
| Product color | Black Cable+Green Adapter |
The adapter is a passive PCIe 3.0 4.0 card with no active components, so it adds no measurable heat or power draw beyond the SSD itself.
You need a free PCIe x4 slot (3.0 or 4.0) on the motherboard and a U.2 SFF-8639 NVMe SSD; the 50cm cable connects the card's SFF-8643 port to the drive.
No — the kit is designed only for NVMe U.2 SSDs such as the 750 series and explicitly does not support SATA or SAS disks.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?