Vszerda PCIe 36-pin 1x extension cable 180° 20 cm
A 20 cm, 36-pin PCIe 1x extension cable with 180° connectors, EMI shielding and 28/30 AWG conductors for 1U/2U cases
- Extends PCIe slot reach by 20 cm
- 180° connector fits tight 1U or 2U chassis
- 36-pin 1x link supports x1, x4, x8 and x16 cards
- 28/30 AWG pure copper with tin plating for stable signal
- TPE sleeve and PE insulation shield against EMI
36-pin PCIe 1x extension cable
This 36-pin PCIe extension cable adds 20 cm of reach for a single-lane PCIe device. It uses 28/30 AWG pure copper conductors with tin plating and axial construction for stable Gen3 8 Gbps signalling. EMI shielding combines a TPE sleeve and PE insulation layer. The 180-degree connector eases routing in 1U or 2U chassis.
Suited for single-lane risers in compact servers
Builders fitting a PCIe 1x, 4x, 8x or 16x card that will operate at 1x speed can use this cable in space-constrained cases. It is not for workloads that need multi-lane throughput such as GPU mining rigs or high-speed storage arrays. The 1x electrical limit means wider cards will run at reduced bandwidth.
Single-lane electrical operation
Although the connector accepts up to 16x cards, the cable carries only one PCIe lane, so any device plugged into it negotiates at 1x speed regardless of slot width. This single specification determines whether the part meets the bandwidth needs of the intended card.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What is the maximum PCIe lane width this 36-pin extension cable can carry?
The cable supports PCIe x1, x4, x8 and x16 cards, but all operate at x1 speed only.
Does the 20 cm cable generate noticeable heat or noise during continuous operation?
As a passive copper cable it produces no noise and negligible heat under normal use.
Which slot type must the motherboard provide for this 180-degree extension to connect?
The host side requires a standard PCIe x16 slot to accept the 36-pin plug.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





