Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
PCIe 4.0 x1 riser cable with dual 90-degree connectors extends a slot by 1.97 inches using a flexible 36-pin design rated for 16 Gbps
This 5 cm PCIe 4.0 riser cable uses a 36-pin X1 male-to-female layout with dual 90-degree connectors. It suits builders who need to route an X1 card in tight spaces or connect open-ended devices such as 2.5G diskless boot cards, capture cards, SSD RAID cards or GPUs limited to X1 bandwidth. The 16 Gbps bandwidth handles high-frequency signals while remaining backward compatible with earlier PCIe generations.
Verify that your board has a free PCIe X1 slot and that the card you plan to install uses an open-ended X1 connector or larger open-ended variant. The 1.97-inch cable length and fixed 90-degree angles on both ends require enough clearance around the slot and the installed card. Ensure the chassis can accommodate the right-angle orientation without stressing the solder points secured by the reinforced bolts and nuts.
The cable is a passive copper assembly with TPE shielding and PE insulation, so it adds no active cooling, fan noise or power draw to the system. Signal integrity relies on the pure copper tin-plated core and the shielding layer to resist electromagnetic interference during data transfer. Normal operation stays within the 16 Gbps specification without generating measurable heat beyond the host slot and connected device.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | XRIKUI |
| Product type | PCIe |
| Performance | |
| Rated speed | 16000000000 bits per second |
| Ports & slots | |
| Connector count | 36 |
| Connector details | Pcie X1 |
| Connector gender | Male-to-Female |
| Size & build | |
| Cable shielding | Data Transfer |
The cable itself includes bolts and nuts on the PCB ends for reinforcement; no extra screws or brackets are mentioned, so plan to use your case or bracket hardware.
At 5 cm (1.97 inch) the cable only reaches devices positioned very close to the slot; choose a longer riser if the GPU sits farther away.
The x1 4.0 lane delivers up to 16 Gbps raw bandwidth, so a 2.5 GbE card will operate at its full line rate without bottleneck.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?