Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects PCIe 4.0 Slimline SAS SFF 8654 4i 38Pin to Mini SAS HD SFF 8643 devices at 12Gbps using 30AWG copper with 10-ohm impedance, 0.5m length
This 0.5 metre cable bridges PCIe 4.0 Slimline SAS SFF 8654 4i 38Pin ports to Mini SAS HD SFF 8643 connectors. It serves server builders and storage engineers who need a direct link between modern controllers and existing drive backplanes or RAID cards. The 30AWG copper conductors support high-density internal wiring without bulky adapters.
As a passive copper assembly the cable adds no active heat, fan noise or power load to the chassis. Its 10-ohm impedance design preserves signal integrity at 12Gbps per channel, reducing retransmits that could otherwise increase controller workload. The slim black jacket routes cleanly alongside other loom runs in dense rack environments.
The cable replaces legacy Mini SAS HD to Mini SAS HD links when the host side moves to the narrower SFF 8654 interface. The jump is worth it when a new PCIe 4.0 controller or backplane adopts the 38-pin connector but the target enclosure still presents SFF 8643 ports. It is not for installations that require longer runs beyond the available 0.5m or 1m lengths.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Align the keyed SFF 8654 4i 38Pin connector with the backplane port, press straight in until the latch clicks, and avoid angling the plug which can bend the fine 30AWG copper pins.
The 30AWG copper wires are rated for the cable's service life; inspect the latch and strain relief during maintenance, but no scheduled conductor replacement is required.
The 10-ohm impedance is optimised for signal integrity at 12Gbps per channel; the practical limit is the 0.5m length, beyond which attenuation would increase.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?