Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 20 cm PCIe 4.0 x1 riser cable with dual 90-degree connectors and 36-pin full-function design for tight spaces
This 20 cm riser cable carries a full 36-pin PCIe x1 connection between a motherboard slot and a peripheral card. Both ends use 90-degree connectors so the assembly hugs the board edge, making it practical for small-form-factor cases, mining frames or any layout where a straight bracket would foul adjacent components. The male-to-female gender lets you extend the slot without changing the card orientation.
The cable is entirely passive with no active cooling, so it adds no fan noise and draws no auxiliary power. Signal integrity at PCIe 4.0 speeds is maintained by a pure copper core with tin plating and a TPE shielding layer that suppresses electromagnetic interference. Backward compatibility with 3.0, 2.0 and 1.0 links means the same cable works across generations without extra configuration.
The female connector is open-ended, allowing x4, x8 or x16 cards to seat physically while operating at x1 electrical width. This lets you mount 2.5G diskless boot cards, remote switch cards, capture cards, SSD RAID controllers or GPUs limited to x1 bandwidth. Reinforced PCB mounting with bolts and nuts prevents stress on the solder joints during repeated insertion cycles.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | XRIKUI |
| Product type | PCIe |
| Performance | |
| Rated speed | 2 GB/s |
| Ports & slots | |
| Connector count | 36 |
| Connector details | Pcie X1 |
| Connector gender | Male-to-Female |
| Size & build | |
| Cable shielding | Data Transfer |
Connect the 90-degree male end to the motherboard PCIe X1 slot and the 90-degree female end to the add-in card; the step most people miss is tightening the bolts and nuts on both PCB brackets so the solder points do not tear under cable tension.
The pure copper cores with tin plating and TPE shielding are rated for the life of the build; no scheduled replacement is required unless physical damage occurs to the connectors or the cable jacket.
The X1 link caps sustained throughput at 16 Gbps (2 GB/s), so bandwidth saturation is the first bottleneck before any thermal or signal-degradation issue arises.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?