Vszerda PCIe 4.0 x16 Riser Cable 200mm 90 Degree White
PCIe 4.0 x16 riser cable extends a graphics card 200 mm with a 90-degree connector for tight builds
- PCIe 4.0 delivers 64 Gb/s bandwidth at 16 GT/s
- 200 mm length fits most chassis for flexible GPU placement
- 90 degree right-angle design reduces cable stress and protects the slot
- Plug-and-play installation with no BIOS setup required
- Cable protector enhances durability and prevents damage
PCIe 4.0 x16 riser cable 200 mm
This white PCIe 4.0 x16 riser cable measures 200 mm and provides a 90-degree right-angle connector. It delivers a 16 GT/s raw transfer rate and over 64 Gb/s bi-directional bandwidth with PCIe 4.0 devices while remaining fully backward compatible with PCIe 3.0 hardware. The flexible design includes a cable protector for added durability and requires no BIOS configuration.
Suited for compact or vertical GPU builds
Builders fitting a graphics card into a small ITX chassis or mounting it vertically in a larger tower will benefit from the short length and right-angle plug that reduce cable bulk and bending stress. The extender works with mainstream motherboards and supported GPUs when installed in a 16x slot with system power off. It does not suit systems that need a longer cable run or a straight connector.
16 GT/s transfer rate decides compatibility
The single specification that determines whether this riser matches the build is the 16 GT/s raw transfer rate of PCIe 4.0 x16, which provides over 64 Gb/s bi-directional bandwidth. If the motherboard and graphics card both operate at that rate the cable will not limit performance; if either device is limited to PCIe 3.0 the link will fall back to the lower speed.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $32.99
- Pricier than about 73% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 16 GT/s signal hold up on a 200 mm run inside a case?
The cable is rated for PCIe 4.0 at 16 GT/s and 64 Gb/s bi-directional, so the 200 mm length is designed to maintain full speed.
Does the 90 degree plug run hotter or draw more power than a straight connector?
The right-angle design only changes the physical routing; it adds no active components, so heat and power draw stay the same as a straight riser.
What motherboard slot and GPU power connectors are needed for this riser to work?
You need a free PCIe x16 slot on the motherboard and the normal auxiliary power cables from your PSU for the graphics card.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister HQ-02-15011H double-lamp large-port high-voltage bar internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





