We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White flat PCIe 4.0 x16 riser cable with dual-sided reverse 180-degree connectors, 30cm long

Vszerda

Vszerda PCIe 4.0 x16 Riser Cable White 30cm

SKU CH-0ZG6-9NNXX

A PCIe 4.0 x16 riser cable extends a graphics card 30 cm from the motherboard with a flexible, shielded design that supports 128 Gbps bandwidth and is backward compatible with PCIe 3.0, 2.0 and 1.0

  • Supports RTX 4090, 4080, 4070, 4060 and RX 7900–7500 GPUs
  • PCIe 4.0 x16 delivers 128 Gbps bandwidth for high-speed data
  • 180-degree shielded connectors reduce electromagnetic interference in vertical mounts
  • 30 cm slim, flat cable enables flexible routing and tidy cable management
  • Backward compatible with PCIe 3.0, 2.0 and 1.0 for broad motherboard support

PCIe 4.0 x16 GPU riser cable

This white 30 cm cable extends a graphics card away from the motherboard using a full x16 PCIe 4.0 link rated at 128 Gbps. It supports RTX 40 series cards such as the 4090 4080 4070 4060 and RX 7000 series cards such as the 7900 7800 7700 7600 7500 while remaining backward compatible with earlier PCIe versions.

Builders needing vertical GPU mounting

The dual-sided reverse 180 degree ports and slim foldable PCB let you route the card behind the motherboard tray or into a vertical bracket without sharp bends. Systems that require a longer reach than 30 cm or a different connector orientation will need another solution.

Shielded 180 degree connectors

The electromagnetic interference shielding on the reversed ports preserves signal integrity at 4.0 speeds when the cable is folded or twisted. The included single riser cable is ready to install with no extra adapters or software required.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $40.99
Pricier than about 79% of the 7,693 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does the cable need a motherboard with a PCIe x16 slot to connect the GPU?

Yes, the riser plugs into a standard PCIe 4.0 x16 slot on the motherboard and extends the connection to the graphics card.

Will the cable work with a graphics card that only supports PCIe 3.0?

The riser is backward compatible with PCIe 3.0, 2.0 and 1.0, so a PCIe 3.0 card will function at its native speed.

How can I verify the link is running at PCIe 4.0 after installation?

Check the link width and speed in GPU-Z or the motherboard BIOS; both should show x16 and 4.0 when the card and board support it.

More in Internal PSU & Riser Cables

Similar items