Vszerda PCIe 6-pin to 2×8-pin (6+2) power splitter cable 20 cm 18AWG
Splits one PCIe 6-pin PSU connector into two 8-pin (6+2) GPU plugs using 18AWG copper over 20 cm
- Powers two graphics cards from one PSU connector
- 18AWG copper conductors deliver stable current
- 20 cm length fits compact mining rigs
- Each output supports 6-pin or 8-pin GPUs
- PCI Express 2.0 compatible connectors
20 cm PCIe 6-pin to dual 8-pin splitter
This Vszerda cable splits a single PSU 6-pin PCIe connector into two 8-pin (6+2) female plugs. It is built for miners or builders who need to power two graphics cards from one 6-pin rail. The 18AWG copper conductors handle the current required by typical mid-range GPUs.
18AWG copper conductor rating
The 18AWG wire gauge is the critical spec that determines safe current delivery. Thinner wire would overheat under dual-GPU load, while thicker wire is unnecessary bulk. This gauge matches the 6-pin source rating so the splitter does not become the bottleneck.
Simple plug-in, watch total draw
Installation is a direct male-to-female connection with no tools required. The 20 cm length keeps routing tidy inside mining frames or compact cases. The common mistake is exceeding the 6-pin source limit; the splitter only divides power, it does not create extra wattage.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How does the 2.0 designation affect what this splitter can deliver to a graphics card?
The 2.0 label refers to the PCI Express connector generation; the splitter simply routes the existing 6-pin supply through to two 6+2 outputs without changing voltage or signalling.
Will a single PSU 6-pin connector safely feed two 8-pin (6+2) GPU inputs through this adapter?
The cable uses 18 AWG copper conductors to carry the supply from one 6-pin to two 6+2 connectors; total draw must stay within what the PSU 6-pin rail is rated for.
What clearance is needed to route the 20 cm ribbon between the PSU and a dual-8-pin graphics card?
The flat ribbon measures 20 cm end-to-end with a 6-pin male at one end and two 6+2 females at the other, so allow that length plus connector depth inside the case.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





