Vszerda PCIe 6pin to 2x 8pin(6+2) Power Splitter Cable 8in 18AWG
Splits one PSU 6-pin PCIe connector into two 8-pin (6+2) GPU plugs using 18AWG copper over 20 cm length
- Powers two graphics cards from one PSU connector
- 18AWG copper conductors carry the load reliably
- 8-inch length keeps routing tidy inside the case
- Dual 6+2-pin outputs fit 6-pin and 8-pin GPUs
- PCIe 2.0 compatible connectors support SLI and CrossFire setups
PCIe 6-pin to dual 8-pin splitter
This Vszerda cable splits a single 6-pin PCIe output from the power supply into two 8-pin (6+2) connectors for graphics cards. The 18AWG copper conductors carry the load across an 8-inch ribbon cable. Each female connector accepts both 6-pin and 8-pin plugs, making it suitable for a range of GPU power inputs.
Suited for dual-GPU mining rigs
Builders adding a second card to a PSU with limited 6-pin leads can use this adapter to power both connectors. Systems that already provide enough native 8-pin cables, or that rely on a single high-wattage GPU requiring dedicated 8-pin feeds from the PSU, will not need this splitter.
Single 6-pin source feeds two 8-pin connectors
The cable draws all power for both GPU connectors from one 6-pin PSU output. Combined load must stay within what that single 6-pin rail can safely deliver, so the total draw of the attached cards decides whether this splitter is adequate.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does my power supply need a spare 6-pin PCIe connector for this splitter to work?
Yes — the splitter plugs into one 6-pin PCIe output on the PSU and provides two 8-pin (6+2) connectors for the graphics card.
Can I use this cable with a graphics card that only has a single 6-pin power input?
Each output is an 8-pin (6+2) female connector; the extra two pins can be left unplugged so the cable works with 6-pin card inputs.
How can I verify the cable is delivering power correctly once installed?
The system should post normally and the GPU should be detected in device manager or BIOS without power-limit throttling.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





