Vszerda PWM fan splitter cable 1 to 2, 10.6 inch
Splits one 4-pin PWM header to two fans, one with RPM feedback, 10.6 inch length, 24AWG sleeved cable
- Splits one motherboard header to run two fans
- 4-pin connector passes RPM signal for synchronised speed control
- 3-pin connector omits RPM pin for tandem fan operation
- 24 AWG high-density sleeved cable built for long-term use
- 6 inch length fits standard case fan placements
PWM fan splitter cable 1 to 2
The Vszerda PWM fan splitter cable divides one motherboard 4-pin header into two fan connectors. One branch carries a 4-pin connector that passes the RPM signal for synchronised speed control, while the other uses a 3-pin connector for tandem operation. The 10.6 inch length suits typical case-routing distances.
Check motherboard header and fan count
Verify that your motherboard has a free 4-pin PWM header rated for the combined current of both fans. The splitter sends a single PWM signal to both connectors, so both fans will follow the same speed curve. Ensure the 24AWG sleeved wiring can reach the intended fan positions without strain.
Suits builders adding a second case fan
This cable suits builders who want to run two fans from one header for increased airflow without occupying additional motherboard headers. It is not for setups that need independent speed profiles per fan, or for systems lacking a 4-pin PWM header altogether.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 10.6 inch splitter include both fans or just the cable?
The package contains only the splitter cable; two case fans must be purchased separately.
Should I choose the 4 pin or 3 pin branch for my PWM fan?
Use the 4 pin branch for the fan that needs RPM reporting to the motherboard; the 3 pin branch runs the second fan at the same speed without reporting RPM.
What does the 24 AWG rating mean for the cable in my build?
24 AWG conductors handle typical case-fan currents without voltage drop over the 10.6 inch length.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





