Vszerda PWM Fan Splitter Cable 1 to 2 10.6 inch 2 Pack internal power cable
Connects two PWM fans to one motherboard header with 10.6 inch 24AWG cables for synchronised speed control
- Synchronised fan speeds via 4-pin PWM header
- Dual-fan airflow boost from single motherboard connector
- One RPM-monitoring lead plus one 3-pin tandem lead
- Durable 24 AWG black-sleeved construction
- 6 inch length fits standard case layouts
PWM fan splitter cable 1-to-2
This Vszerda splitter connects two case fans to a single motherboard 4-pin header. One branch carries a 4-pin connector that reports RPM to the board, while the other uses a 3-pin connector for tandem speed control. The pack includes two cables for dual-header setups.
Cable construction and signal handling
Each cable is wrapped in high-density black sleeving over 24 AWG conductors for durability. The 4-pin receptacle passes the PWM signal to both fans so they spin at the same speed under motherboard software control. Compatible with standard 3-pin and 4-pin PC fans from common brands.
10.6 inch length per cable
The 10.6 inch reach suits typical mid-tower routing from a CPU or chassis fan header to paired intake or exhaust fans. Builders needing longer runs or more than two fans per header will need a different solution.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 4-pin and 3-pin branches to my motherboard header?
Plug the 4-pin receptacle into a 4-pin PWM header on the motherboard; the 4-pin branch passes the RPM signal back while the 3-pin branch runs at the same PWM duty cycle without reporting speed.
Will the sleeving or 24AWG conductors degrade and need replacement?
The high-density black sleeving and 24AWG wires are rated for long-term use inside a case; no scheduled replacement is required unless physical damage occurs.
At what current draw does the single header become the limiting factor?
The splitter itself adds negligible resistance, so the practical limit is the motherboard header’s rated current — typically 1 A — which both fans share.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





