Vszerda PWM Fan Splitter Cable 1 to 2 Black Sleeved 2 Way 10 Inch 2 Pack internal power cable
Connects two PWM fans to one motherboard header using 10 inch sleeved cables with 22AWG conductors
- Connects two PWM fans to one header
- 10 inch length fits most case layouts
- 22AWG copper conductor carries power efficiently
- Black sleeved jacket protects wires and looks tidy
- Master and slave plugs synchronise fan speeds
PWM Fan Splitter Cable 1 to 2
This Vszerda PWM fan splitter cable connects two computer PWM fans to a single motherboard fan header. The 1-to-2 Y-cable lets you add an extra fan to increase airflow inside your case. It comes in a 2-pack with black sleeved cables measuring 10 inches each. Both 3-pin and 4-pin fans are supported.
Check Motherboard Header and Fan Connectors
Verify that your motherboard has a 4-pin PWM header available for the splitter's receptacle. The master connector passes the RPM signal to the board while the slave omits it. Note that 3-pin fans will run at full speed without PWM control. Only the fan on the 4-pin connector is monitored by the motherboard.
Sustained Load Behaviour With PWM Control
Under sustained load all connected fans follow the same PWM signal from the motherboard. Fan speeds stay synchronised when controlled through software such as AI Suite or similar utilities. The 22AWG copper conductors deliver stable power to both fans during continuous operation.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the box and do I need any extra connectors?
Two black sleeved PWM Y-cables are included; each splits one motherboard 4-pin header into two fan plugs so no additional connectors are required.
Which version should I pick for 3-pin versus 4-pin fans?
The same cable works with both — 4-pin fans keep PWM control and RPM feedback while 3-pin fans run at full speed because the RPM pin is omitted on the slave plug.
What does the 10 inch length mean when routing inside a case?
Each cable spans 10 inches from the motherboard header to the two fan connectors, giving enough reach for typical mid-tower layouts without excess slack.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





