Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects QSFP+ (SFF-8436) equipment to MiniSAS SFF-8088 ports at 10 Gbps over 6.6 ft of 30 AWG copper with 100 Ω impedance and 38 pins
This two-metre passive copper cable connects a QSFP+ port (SFF-8436) to an external Mini SAS connector (SFF-8088). It carries up to 10 Gbps per channel and uses 30 AWG conductors with a 100 Ω impedance. The 38-pin male-to-female assembly is built to the QSFP MSA and SAS 3.0 specifications. It suits administrators linking switches, HBAs or storage arrays that expose those two interfaces.
Verify that one end of your link uses a QSFP+ (SFF-8436) receptacle and the other an SFF-8088 Mini SAS port. Confirm the 2 m length fits the rack or cabinet layout without strain. Ensure both devices support the same SAS signalling rate so the 10 Gbps per channel capability can be used. The passive design draws no external power, so no auxiliary supply is required.
With 30 AWG conductors and controlled pair-to-pair skew, the cable maintains the 100 Ω impedance across the 2 m run. Low power consumption means no added heat load in dense patch panels. Compliance with the QSFP MSA and SAS 3.0 ensures consistent eye-diagram margins under sustained traffic. The assembly is intended for continuous operation in storage and networking environments.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | H!Fiber.com |
| Product type | Mini SAS |
| Product color | SFF-8088 to QSFP(SFF8436) |
| Performance | |
| Rated speed | 10 Gbit/s |
| Ports & slots | |
| Connector count | 38 |
| Connector details | Component |
| Connector gender | Male-to-Female |
| Size & build | |
| Cable shielding | Calculator |
The box contains a single copper passive cable with a QSFP+ (SFF-8436) male connector on one end and an SFF-8088 Mini SAS male connector on the other, measuring 2 m (6.6 ft). No additional hardware is needed for a direct link.
This 30 AWG, 100 Ω passive copper cable is specified for up to 10 Gbps per channel at the 2 m length, compliant with SAS 3.0 and QSFP MSA, so it matches that requirement directly.
Each of the 38-pin channels can carry up to 10 Gbps, giving an aggregate throughput that depends on how many lanes the connected SAS or QSFP+ ports actually use.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?