Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 110 or 220 V AC to 12 V DC at 10 A with a selectable input switch and metal enclosure
The Vszerda S-120-12 converts AC 110 V or 220 V to a stable DC 12 V output rated at 10 A and 120 W. It is built for installers who need a compact metal-cased unit to run security cameras or LED lighting from mains power. The supply includes an input-voltage selector switch and screw terminals for secure wiring. It operates from -40 °C to 65 °C and carries CCC, FCC and CE compliance marks.
Mount the unit using the 2.5 mm fixing holes and connect L, N, COM and V terminals according to the label. Set the 110 V / 220 V selector before applying power; forgetting this step is the most frequent cause of immediate failure. The built-in fan starts automatically under load, so allow airflow around the 7.87 × 3.93 × 1.77 inch case. Do not open the cover — high voltage is present inside and service should be left to qualified personnel.
A trimmer labelled ADJ allows the DC output to be varied by approximately 15 % around the nominal 12 V level. This lets installers compensate for voltage drop on long cable runs to cameras or LED strips. If the project requires a fixed 12 V with no adjustment, or a different output voltage entirely, this model will not suit the application.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | TFS-120-12 |
| Part number | TFS-120-12 |
| Product color | Silver |
Measure the DC output at the V+ and COM terminals with a multimeter; it should read 12 V under load. Confirm the fan spins when the unit warms up and that the green power LED stays lit.
The box contains one S-120-12 switching power supply. You must provide the AC mains cable, the screw-terminal connectors for L, N, COM, V+ and ADJ, and mounting screws for the 2.5 mm fixing holes.
Set the input selector to 110 V if your mains is 110 V, or to 220 V if your mains is 220 V. Choose the correct position before applying power to avoid damage.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?