Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 0.5-metre SAS cable with SFF-8088 connectors on both ends, 26-pin, 30AWG twinaxial construction supporting 6 Gbps per channel at 100-ohm impedance
This new Vszerda cable connects two external Mini SAS SFF-8088 ports using a 26-pin male-to-male assembly. It measures 0.5 metres (1.64 feet) and uses 30AWG twinaxial conductors with eight pairs. The link is rated for 6Gbps per channel and maintains a 100-Ohm impedance for low-skew transmission. It is compliant with both 3Gb/s and 6Gb/s SAS protocols.
Administrators building or servicing server, storage or DAS enclosures that use external SFF-8088 ports will find the half-metre length convenient for rack-adjacent connections. The hot-pluggable design allows insertion without powering down. Builders who need longer reach, internal backplane connectors or a different pin count should choose another cable type.
The single specification that determines fit is the 6Gbps per channel rating across the 0.5-metre twinax assembly. This bandwidth matches 6Gb/s SAS controllers and external enclosures, while the 100-Ohm impedance preserves signal integrity. If the target equipment requires a higher signalling rate or a longer passive run, this cable will not meet the requirement.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | H!Fiber.com |
| Product type | SAS |
| Product color | SFF-8088 to SFF-8088 |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 26 |
| Connector details | Sfp |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | High Speed |
Yes, each end terminates in a 26-pin SFF-8088 male connector, so both devices must present that port.
The assembly is compliant with both 3 Gb/s and 6 Gb/s SAS protocols, so it will operate at the lower rate when required.
Check the HBA or RAID utility for a reported link speed of 6 Gb/s per lane on the attached port.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?