Vszerda SATA to 3×3/4-pin PWM fan adapter splitter, 2-pack, 27 cm
Two adapters split one 15-pin SATA power connector into three 3-pin or 4-pin PWM fan headers using 27 cm black-sleeved 24AWG cable
- Powers three fans from one SATA 15-pin connector
- PWM speed control works on one 4-pin fan
- 3-pin fans run at fixed 12 V voltage
- 24 AWG tinned copper with black sleeving
- 27 cm cable fits tight chassis builds
SATA 15-pin to triple fan hub
Each adapter converts one SATA 15-pin power connector into three 3-pin or 4-pin fan headers, letting a power supply drive up to three chassis fans directly. The 24 AWG tinned-copper cable is black-sleeved and 27 cm long, and the pack contains two identical splitters.
Replaces motherboard fan headers
When a board lacks enough 4-pin headers, these splitters move the current draw to the PSU and preserve PWM control for one connected fan. The upgrade is worthwhile whenever the motherboard cannot supply sufficient amperage for all installed fans or when only a single PWM header is available.
Build integration notes
One SATA power lead per splitter is required, so ensure the PSU has spare connectors. Only one 4-pin fan per adapter reports speed and responds to PWM; additional 4-pin fans run at full 12 V, while 3-pin fans always run at fixed voltage.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance do I need for the 27 cm sleeved cable and three fan connectors?
The black sleeved cable is approximately 27 cm long with three 3/4-pin male fan connectors on the output end.
Which fan header should I plug the PWM fan into for speed control?
Only one 4-pin fan receives PWM speed regulation; the motherboard reads speed from that single header while the other two run at fixed 12 V.
Will the SATA power connector or 24 AWG wires need replacement over time?
The adapter uses a 15-pin SATA male connector and 24 AWG tinned copper conductors; no user-serviceable parts are inside, so replacement is only needed if the cable is physically damaged.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





