Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts an SCA 80-pin female interface to an IDE 50-pin male connector for connecting 50-pin SCSI devices to 80-pin server motherboards, requiring a Molex 4-pin power connection
This adapter converts an SCA 80-pin female connector to an IDE 50-pin male connector, allowing a 50-pin low-speed SCSI device to attach to an 80-pin SCSI backplane. It includes a 4-pin Molex power connector to supply the drive. The unit weighs 0.018 kilograms and is finished in black. It suits disks, tapes, CD-ROMs, rewritable optical drives, printers, scanners and communication equipment.
The IDE 50-pin connector is not a standard 40-pin or 44-pin IDE interface and will not work in ordinary desktop computers. It is intended only for industrial server motherboards that provide a 50-pin IDE interface. A separate Molex 4-pin power connection is required for the attached drive. The maker recommends the adapter for direct data transfers or backups rather than continuous primary storage duty.
Connector A is an SCA 80-pin female; Connector B is an IDE 50-pin male; Connector C is a 4-pin power plug. This specific gender and pin-count combination decides whether the adapter matches your backplane and drive. Verify that your host presents an 80-pin SCA receptacle and your drive terminates in a 50-pin IDE plug before purchasing.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Vszerda |
| Part number | AUB09G27DNN4 |
| Product color | Black |
The adapter presents an SCA 80-pin female socket on one side and an IDE 50-pin male plug on the other, so a 50-pin SCSI drive plugs into the male end while the 80-pin backplane accepts the female end.
It lets a 50-pin low-speed SCSI disk, tape, CD-ROM or scanner connect to an 80-pin SCA backplane on an industrial server motherboard, with a separate 4-pin Molex power feed required for the drive.
No — it is a 50-pin IDE interface found only on industrial server motherboards, not the 40-pin or 44-pin connectors used in ordinary computers.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?