Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds an OCuLink SFF-8612 port to a 2230 M-Key slot for NVME SSDs or eGPU enclosures at 64Gbps over PCIe 4.0
This adapter adds a single OCuLink SFF-8612 port to a system with a 2230 M-Key slot. It carries PCI Express 4.0 signals using the NVMe protocol for NVME SSDs or eGPU enclosures. The 67-pin male connector plugs directly into the motherboard. An optional cable completes the link to the target device.
The passive copper construction has no active cooling and generates no audible noise. Power draw is limited to the signalling requirements of the PCIe 4.0 link itself. The vertical angled connector reduces strain in tight layouts without adding thermal load.
The card fits into any 2230 M-Key slot and presents one SFF-8612 female port for an external cable. It frees the builder from hunting for a native OCuLink header on the board. Buyers who need multiple OCuLink ports or a different M-Key length cannot use this single-port 2230 design.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Xiwai |
| Model name | SF-023-2230MM-XY |
| Product color | Black NVMe eGPU Card |
| Size & build | |
| Conductor type | Copper |
| Build details | Copper |
Insert the 67 pin M.2 Key M male connector vertically into the 2230 M-Key slot at the angled orientation, then secure the board with the mounting screw; the step often missed is fastening that screw before attaching any OCuLink cable, which prevents signal loss from board flex.
No scheduled maintenance is required; inspect the copper contacts and the vertical OCuLink SFF-8612 female port for dust or bent pins when swapping cables, and replace the adapter only if the PCIe 4.0 link fails to train at 64Gbps.
The 64Gbps aggregate bandwidth ceiling of the PCIe 4.0 x4 link is the first hard limit; sustained NVMe 1.2 traffic will saturate this before any thermal or connector constraint arises.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?